Aerostick
Product Description
AEROSTICK is a modified neoprene contact adhesive specially formulated for bonding Aeroflex range of insulation firmly together with cold weld joints. The high water vapour resistance and good weathering properties of AEROSTICK can prevent water or moisture from penetrating through the insulation joints. AEROSTICK is able to form a strong, firm and permanent bonding between the applied materials providing long-lasting performance.
Advantages
FAB1
-
High strength adhesion
-
Low VOC
FAB2
-
Easy to apply
-
Enhanced coverage
Applications
-
Surface on which Aerostick applied should be dry, clean and free from dust, grit, oil, grease or any other loose materials.
-
Stir AEROSTICK well before applying a thin and even coat of AEROSTICK onto both joining surfaces by using a short hair brush, spreader or metal spatula.
-
Allow solvent content of AEROSTICK to evaporate until the adhesive becomes dry to touch, but tacky, before joining the materials together normally open time is 5 to 30 minutes.
-
Bonding is possible within 2 mins. after application, if used on absorbent or permeable materials such as, cork board and chipboard etc. If applied on non-absorbent or non-permeable materials like Aeroflex inslulation rubber or metal, a minimum of 5-20 mins. should be allowed to elapse before the surfaces can be bonded.
-
Press and hold the surfaces to be bonded together under firm pressure.
Storage & Shelf Life
AEROSTICK can be preserved for at least 12 months in original unopened containers when stored indoors, away from direct sunlight. Recommended storage temperature range from +5°C to +35°C. Avoid keeping AEROSTICK under conditions that are out of the recommended storage temperature range.